|
Toshiba Tecra A3 screen removal. |
|
 |
STEP 1
Remove two LCD mask seals.
Remove two screws hidden under seals. |
|
|
 |
STEP 2
Put your fingers between the mask and the LCD screen and carefully release the mask latches. |
|
|
|
STEP 3
Remove the mask. Do not hurry; twist the mask slightly to release latches. |
|
|
|
STEP 4
Removed 2 screws securing the LCD screen to the display cover.
|
|
|
 |
STEP 5
Remove a securing tape from the LCD display cable.
Disconnect the display video cable. |
|
|
 |
STEP 6
Remove four screws on each side of the LCD screen.
Turn the LCD display over and place it on the top cover.
|
|
|
|
STEP 7
Disconnect cables on each side of the FL inverter board.
Remove one screw securing the FL inverter. |
|
|
 |
STEP 8
Remove the FL inverter board. Now you can replace the inverter. |
|
|
 |
STEP 9
DONE !!! |
|
|
|
|