STEP 1

Turn the tablet PC upside down.
Remove the battery.

STEP 2

Remove two mask seals on the top of the display and four rabber seals on the bottom.
Remove six screws under the mask seals.

STEP 3

Use a guitar pick to separate the LCD mask and the display cover.
Move it slowly along the edge to release the mask latches.

STEP 4

Lift off the LCD mask and remove it.

STEP 5

Remove four screws securing the LCD screen to the display cover.
Carefully turn over the screen and place it on the palmrest.

STEP 6

Remove two strips of tape covering the connectors.
Disconnect the LCD cable and the digitizer cable on the back of the LCD.

STEP 7

Disconnect the screen from the FL inverter board.
Remove the LCD screen and place it on the bench.

STEP 8

Remove three strips of tape from the digitizer.
Remove four screws securing the digitizer to the LCD display.

STEP 9

Carefully lift up the LCD circuit board.

STEP 10

Remove and replace the digitizer.

STEP 11

Done!