STEP 1

Remove four LCD mask seals.
Remove four screws hidden under seals.

STEP 2

Put your fingers between the mask and the LCD screen and carefully release the mask latches.

STEP 3

Remove the mask. Do not hurry; twist the mask slightly to release latches.

STEP 4

Removed 6 screws securing the LCD screen.

STEP 5

Lift the LCD screen off the cover.

STEP 6

Remove the securing tape from the display connector.
Disconnect the display cable.

STEP 7

Remove the screw securing the FL inverter.

STEP 8

Lift off the FL inverter board.
Disconnect FL inverter cables on both ends.
Remove the FL inverter.
Remove the LCD screen.

STEP 9

Disassembly done!

Also, read complete laptop disassembly instructions.